Eaton 5S700
Power outage? The Eaton 5S700 switches your NAS or home lab to battery in an instant, with 8 outlets and line-interactive voltage correction.
Buy at AmazonAs an Amazon Associate I earn from qualifying purchases.
Characteristics
- Power: 700VA / 420W
- Outlets: 8x NEMA 5-15R (4 battery-backed + 4 surge-only)
- Runtime: ≈12 min at half load, 2 min at full load
- Topology: Line-interactive, coax/data line protection
- 8 outlets, line-interactive AVR, quiet operation
Detailed overview: Eaton 5S700 UPS
The Eaton 5S700 is a backup UPS built to protect a fixed piece of electronics, not to replace a solar inverter or an RV's 12V to 120V converter: it constantly monitors mains power and switches to battery the instant it detects an outage or a surge. For a home fitted with residential solar, or a small home lab, that is exactly what belongs between the wall outlet and a NAS, a network switch or a router: a few seconds of dropout is sometimes enough to corrupt a NAS mid write or drop an active SSH session. Eaton's 3S line sold across Europe is not available in the US; the 5S700 is the brand's closest equivalent for a home lab or small office setup on this market.
With 700VA and 420W of continuous power, the 5S700 covers a NAS plus networking gear comfortably: its 8 NEMA 5-15R outlets split into 4 battery-backed plus surge protection, and 4 surge-protection-only, letting you dedicate the most important sockets to the NAS, switch and router. Line-interactive topology, a step up from basic standby designs, corrects sags and minor surges on the line without even touching the battery, which preserves both its runtime and its lifespan. Coax and data/modem line protection guards against surges riding in on those lines as well.
The USB port and Eaton's Intelligent Power monitoring software let you schedule an automatic, clean shutdown of the NAS or server if an outage runs longer than the available runtime, about 12 minutes at half load and roughly 2 minutes at full 420W load, avoiding any data corruption. The sealed lead-acid battery is user-replaceable, and Eco-Control can trim standby energy use by cutting power to secondary peripherals once the master device switches off.
The main thing to plan around is runtime at heavy load: at full 420W it drops to about 2 minutes, so this unit is designed to buy enough time for a clean shutdown rather than to keep a NAS running through a long outage. For a home lab, a NAS or a router connected to a residential solar setup, its outlet count and line-interactive voltage regulation make it one of the more sensible picks in Eaton's US lineup.
Comparison
When choosing a UPS to protect a NAS or a home lab, the Eaton 5S700 is often compared to other models in the same power class, in searches like "Eaton 5S700 vs APC Back-UPS" or "Eaton 5S vs CyberPower". Here is how it stacks up against three alternatives: the Eaton 5S550, its smaller sibling in the same US lineup; the APC Back-UPS BE725BB, a direct rival on power; and the CyberPower CP685AVRG, similarly priced with AVR built in.
| Criterion | Eaton 5S700 | Eaton 5S550 | APC Back-UPS BE725BB | CyberPower CP685AVRG |
|---|---|---|---|---|
| Power | 700VA / 420W | 550VA / 330W | 725VA / 440W | 685VA / 390W |
| Outlets | 8x NEMA (4 battery-backed) | 8x NEMA (4 battery-backed) | 10 outlets (5 battery-backed) | 8 outlets (4 battery-backed) |
| Topology | Line-interactive | Line-interactive | Line-interactive | Line-interactive |
| Display / monitoring | USB software, no display | USB software, no display | No display | No display |
| Observed price | $163.99 | $156.99 | ≈ $95 | ≈ $75 |
Overall, the Eaton 5S700 stands out for its coax/data line protection and Eaton's monitoring software bundled in, features the cheaper CyberPower CP685AVRG does not offer. The APC BE725BB pulls ahead on raw outlet count and slightly higher power, at a noticeably lower price, making it worth a look if the extra sockets matter more than Eaton's software ecosystem.
Our tester's review: Dawid Lojewski
Fitted under our home network rack, the 5S700 keeps a NAS, switch and router running through short outages without a hitch. Eaton does not sell its European 3S line in the US, so the 5S700 is what American buyers actually find, and the 8-outlet layout, 4 battery-backed and 4 surge-only, makes it easy to fit several bulky power bricks without them fighting for space. During a deliberate outage test under load, the switch to battery was instant, with no NAS reboot and no dropped connection. Line-interactive AVR quietly corrected a couple of voltage sags during testing without ever touching the battery, a genuine plus over cheaper standby-only units. Runtime at full 420W load is short, about 2 minutes, just enough for a clean shutdown trigger; at half load it stretches to a more comfortable 12 minutes. For a small home lab, a solid outlet count and voltage regulation for the price.
Frequently asked questions: Eaton 5S700 UPS
Eaton sells its 3S line in Europe and the 5S line in the US; the two ranges do not overlap by name. The 5S700 is the closest US equivalent in power class, outlet type (NEMA 5-15R) and use case.
Eaton rates about 12 minutes of runtime at half load and roughly 2 minutes at full 420W load, enough for the USB monitoring software to trigger a clean NAS shutdown before the battery runs out.
It corrects minor sags and surges on the mains line by adjusting voltage on the fly, without switching to battery. This preserves battery life and shields connected gear from brownouts more effectively than a basic standby UPS.
Yes, the sealed lead-acid battery is user-replaceable, typically after 3 to 5 years depending on use. Eaton sells compatible replacement battery packs.
The 8 NEMA 5-15R outlets split into 4 battery-backed plus surge protection (reserve these for the NAS, router and switch) and 4 surge-protection-only outlets for less critical devices like a monitor or printer.
Other products in the "UPS backup power" category
APC Back-UPS 500VA
See price (7)
Power blip or surge at the campground? This compact APC UPS keeps a router, a Starlink dish or a NAS protected in a van, on a boat or at home.
APC Back-UPS 850VA
See price (19)
Power outage hitting your home solar setup? The APC Back-UPS 850VA keeps a NAS or home server running just long enough for a clean, safe shutdown.
APC Back-UPS Pro 650VA
See price (3)
Protecting a NAS wired to your solar setup or a Starlink dish on the road? This APC Back-UPS Pro adds an LCD screen and network surge protection.
CyberPower CP1500PFCLCD
See price (7)
Got a NAS with an active PFC power supply? The CyberPower CP1500PFCLCD delivers a true pure sine wave on battery, where a standard UPS can struggle to match it.
Published on 05/09/2026