A GaN charger built to replace the laptop brick
Most laptop chargers stay bulky and single-purpose. The Ugreen Nexode Pro 100W aims for the opposite: a compact case built on GaN Infinity technology, able to charge a MacBook at full speed while powering two other devices thanks to its 3 ports.
100W on one port, enough to charge a MacBook Pro quickly
The main USB-C port delivers up to 100W on its own. Ugreen states it charges a 14-inch MacBook Pro to 50% in 27 minutes, as well as a MacBook Air, an iPad or an iPhone at full speed. This power output covers nearly every USB-C laptop on the market, including the most demanding models, without needing the bulky wall brick it ships with.
Three ports, transparent power sharing
With its 2 USB-C ports and 1 USB-A port, the Nexode Pro 100W powers up to three devices at once, a laptop, a smartphone and earbuds for example. When all three ports are used by demanding devices, each logically gets less than the 100W available on the single port, total power staying capped at 100W and shared among the connected devices.
PD 3.0, Galaxy PPS, Quick Charge 4+ and FCP
The Nexode Pro 100W handles the main fast-charging protocols: Power Delivery 3.0, Galaxy PPS up to 60W, Quick Charge 4+ and FCP. This combination covers MacBooks, iPhones, iPads, most Galaxy and Pixel phones, and the majority of recent Android smartphones, for fast charging without needing to check compatibility beforehand.
GaN Infinity and AirPyra, but no absolute figures
GaN Infinity technology, according to Ugreen, allows a case 45% smaller than a conventional 140W charger, helped by AirPyra technology for an energy density claimed to be up to 89% higher. These figures remain relative comparisons supplied by the brand, with no independent measurement to confirm them.
ThermalGuard 2.0, but no warranty duration stated
The ThermalGuard 2.0 system provides active temperature management during charging, a named and documented protection rather than a generic mention. No warranty duration is stated on the product page, however, a point worth checking directly with the seller before buying.
Against the Anker 736, the Apple 96W and the Ugreen Nexode 65W
How does the Nexode Pro 100W compare with other GaN chargers of similar power?
| Criterion | Nexode Pro 100W | Anker 736 (100W) | Apple 96W USB-C | Ugreen Nexode 65W |
|---|---|---|---|---|
| Power | 100W | 100W | 96W | 65W |
| Ports | 3 (2 USB-C + USB-A) | 3 (2 USB-C + USB-A) | 1 (USB-C) | 3 (2 USB-C + USB-A) |
| GaN technology | GaN Infinity | GaN II | No | GaN II |
| Observed price | $59.99 | ≈ $92.07 | ≈ $98.84 | ≈ $41.97 |
The Anker 736 is a well-known reference in the category but pricier for equal power. The Apple 96W stays single-port and expensive, of little interest for anyone wanting to power several devices. The Ugreen Nexode 65W, less powerful, suits anyone who does not need to charge a demanding laptop. For a single 100W, 3-port charger, the Nexode Pro 100W costs noticeably less than both the Anker 736 and the Apple 96W on this market, with at least equivalent protocol compatibility.
Who the Ugreen Nexode Pro 100W is for
This charger suits anyone who wants to replace several wall bricks with a single compact device, able to charge a demanding laptop and power two accessories at the same time. For lighter use with no laptop to charge, the Ugreen Nexode 65W is plenty and costs less; for a high-end single port from Apple, the Apple 96W USB-C remains an option, but without the convenience of multiple ports.
